Accessories

Enviro Care Neutral Disinfectant is available in a one-gallon container and can be used to disinfect all surfaces – equipment, counter tops, and walls. It is an approved disinfectant under the U.S. Environmental Protection Agency’s Emerging Viral Pathogen Guidance, in response to COVID-19 and other viruses.

Coverage Rate: Makes 64 gallons of disinfectant

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Highly concentrated Green Seal™ certified E-Cleaner is available in a one-gallon container and is effective for all routine cleaning jobs. It can be used for damp mopping, scrubbing, spray and wipe cleaning, or with a hand bucket and cloth.

Coverage Rates:Initial Cleaning – one gallon for every 2,000-square-feet of rubber (15-square-feet per ounce)

E-Grip Evolve is a proprietary, high performance, wet-set adhesive that is ideal for use with Ecore Athletic’s eLeVaTe. Available in four gallon pails.

• 100-125-square-feet/gallon – 1/16-inch by 1/16-inch by 1/16-inch square notch trowel
• 150-200-square-feet/gallon – 1/32-inch by 1/16-inch by 1/32-inch U notch trowel

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

E-Grip III is a revolutionary zero-VOC, low odor, one-component urethane adhesive formulated for use with Ecore surfaces. It features improved tack properties, helping to keep seams tight. E-Grip III has been specifically engineered to be solvent-free. With a moisture-cured, no-mix, non-sag and permanently elastic formula, it provides excellent adhesion to elastomers, concrete, and wood in both indoor and outdoor applications.

LOBADUR® 2K InvisibleProtect is a two-part, water-based urethane that is designed to protect vulcanized composition rubber (VCR) floors from dirt, soiling, and scuff marks. This clear floor finish makes VCR surface layers easier to maintain and clean. This product is not designed to be applied in areas where there will be weight drops.

Coverage Rates:

• 400-500 square-feet/gallon

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

E-Grip Tape is designed for ease of installation and immediate use with any Ecore product 8.5mm and under in thickness. Available in 29.5” x 131 LF rolls, this product can be applied efficiently and can support traffic and heavy loads immediately after installation. E-Grip Tape ensures a semi-permanent bond to a variety of substrates including some smooth existing floorcoverings.

Coverage Rates:

• 322 square feet/roll

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Fast acting with low odor, E-Strip removes multiple layers of finish, without harsh alkalies and other conventional components. E-Strip is available in a one-gallon container.

Coverage Rates:Heavy Soil Removal = one gallon for every 1,250-square-feet of rubber (10-square-feet per ounce)

E-Grip 99 is a one-part modified urethane adhesive available in 4-gallon pails.. This product is designed for extremely high moisture applications in a substrate with up to 99% RH. E-Grip 99 can be used with all VCR products and vinyl/LVT over concrete. This product is easy to trowel and requires no testing of the substrate’s pH (5-14).

Coverage Rates:

• 135 square-feet/gallon - 1/16” x 1/32” x 1/32” U-notch trowel (LVT/LVP only)
• 105 square-feet/gallon – 1/16” square notch trowel

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Available in 4-gallon pails E-Grip 95 is a moisture-cured one-part urethane adhesive that is formulated specifically for Ecore’s Vulcanized Composition Rubber (VCR) surfaces. This adhesive is ideal for applications where there is a high amount of moisture in the substrate with up to 95% relative humidity (RH).

Coverage Rates:

• 160 square-feet/gallon - 1/16” x 1/32” x 1/32” U-notch trowel
• 115 square-feet/gallon – 1/16” square notch trowel

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Creating a new standard in floor finishing, E-Finish combines an unequaled level of environmental preference with performance, surpassing conventional floor finishing technologies. It gives a tough, black-mark resistant shine with no powdering. E-Finish excels with all maintenance systems, including scrub and recoat, spray buff, and burnish. It contains no Polymers or Urethane and meets ASTM D2047-93 requirements for slip resistance.

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Interlocking transition for use with RageTurf Rally interlocking tiles. Great for room openings or when area mat installations are required.

• 46" x 12" x ¾"

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Quad Blok Interlocking Connectors are used with 2.5-inch molded tiles. These connectors feature precisely located openings that interface with the corner leg understructure of molded tiles for a reliable easy-down/easy-up installation.

• 17mm x 8” x 8”

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

These transition strips are for non-ADA required applications.

• 2.25" x 8" x 48" (for use with 2.5" tiles)
• 1” x 4" x 48"

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Quad Blok Interlocking Connectors are used with 1-inch molded tiles. These connectors feature precisely located openings that interface with the corner leg understructure of molded tiles for a reliable easy-down/easy-up installation.

• 12mm x 4.74” x 4.74”

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Straight transition for use with RageTurf Rally and Performance Rally. For interlocking turf tile, straight transitions are available for a more finished look after trimming tabs from tile edge.

• 48" x 4" x ¾"

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

ADA Ramps are available to make the transition between spaces easier and ADA compliant.

• 2.5" x 64" x 30" (Includes 2 ADA Access Ramps, a 6" Transition Toe, and Left/Right Side Reducer Pair). Available in black and PlayGuard Tile Pigmented colors.
• 1” x 48" x 12"

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Ecore’s Sanitary Base System creates an integrated floor system that supports sterile environments. This system provides a seamless and watertight transition between the wall and floor. The base is available in 7 colors and can be used with HydroGrip Motivate. The system includes sanitary base, composition rubber underlayment, E-Flash Tape and Cold weld. Please visit the HydroGrip Motivate product page to view the Tech Manual that provides information on how to install this accessory.

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Available in Terra Cotta, Forest Green, Grey, and Black these Border Edges are ideal for curbing edges.

• 2" x 10" x 39"

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

This 24mm reducer is available in Terra Cotta, Forest Green, Grey, and Black these beveled edge reducers are ideal for curbing and reducing.

• 15/16" x 2.5" x 39"

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

This 43mm reducer is for use with Modzilla and provides a transition from Modzilla to other flooring products. This product can also be used with PaveSafe products. This product is for non-ADA required applications. Available in Terra Cotta, Forest Green, Grey, and Black.

• 1 11/16" x 12" x 39"

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.

Impact Zones are the black "drop areas" in an Inlaid Lifting Station. This product comes in 4 ft wide rolls and allows you to cut to custom dimensions onsite. This provides a smooth transition to Beast Plus and Rally with no need for field lamination.

• 14.5mm x 4 ft x 25 LF

Please contact customer service to order: 866.795.2732 or salessupport@ecoreintl.com.